Grabo OTTOVAC Manual Electric Battery Operated Suction Cup

Introduction The OTTOVAC is a portable electric vacuum lifting device intended to lift, move and place glass and any other material that has a
smooth, flat and non-porous surface.The OTTOVAC has a built-in pressure sensor with an automatic start / stop function. When the vacuum in
thebase of the suction cup reaches -55 kPa, the pump will automatically stop after a 3-second delay. When thevacuum level drops below -55 kPa,
the pump willautomatically restart, thereby achieving the requiredpressure when in use.
OTTOVAC lifting capacity
NOTICE: The OTTOVAC was tested up to 200 kg (440 lbs) at
maximum lifting force under ideal conditions. However, this
figure is the breaking point under optimal lab testing conditions
which must never be reached in real world applications!
Technical Specifications
Model :OTTOVAC-V1(OV-V1)
Working Voltage: 6V
Rated Power: 6W
Non-Stop Running Time(One set of fully charged battery, loaded,non stop):2h
Working Cycle(Full battery working for 10s and then restartafter 8s):1500 times
Service Life :100000+ times/800h+
Rated Air Flow: 4 L/min
Maximum Vacuum Rate: -0.7 Bar (-70 kPa)
Maximum Lifting Capacity: 200 kg (440 lbs)
Dimensions: 200 x 200 x90 mm
Net Weight (With Battery): 1.2 kg
Working Temperature: 0°- 60°C (32°F – 140°F)